High Application Good Adhension Acrylic Car Paint Easy Operation Auto Paint 15f 2K Primer

• Color: Grey
• Appearance: Liquid
• Main Raw Material: Acrylic & Polyurethane
• Paint Film Property: Antiseptic Paint
• Method: Spray
• Level: Finish Coat
• Model NO.: 2K Primer
• Certification: ISO14001, ISO9001
• Substrate: Iron
• Components: Solvent
• Formation Mechanism: Conversion Type
• Use: Car Paint, Automotive Paint
• Coating: Auto Paint, Automotive Refinish
• Transport Package: Standard Export Carton
• Specification: Carton, Drum, OEM Could Be Serviced
• Trademark: All our brands
• Origin: Guangdong, China
• HS Code: 3208
• Production Capacity: 1000kg/H

Product Description

2K Grey Primer
1: Features: This product is a two-component high solid intermediate paint with excellent filling and flatness, quick drying and easy polishing. Strong binding force to upper and lower coatings.

2: Application: Mainly used for all kinds of vehicles, mechanical equipment and other intermediate coating, in order to increase the gloss and fullness of topcoat.

3: Suitable substrate: polished and clean and dry atomite, epoxy primer, 2K old paint and other surfaces.

4: Mixing ratio: (primer 100%: hardener  25%: thinner  25%)

5: Spraying viscosity and service time: mix evenly before use, spraying viscosity is 20 seconds (coating -4 cups, 25ºC), service life is less than 2 hours /25ºC.

6: Spraying requirements: Choose 1.4-1.8mm caliber spray gun, air pressure 3-4 bar, spray 2-3 single layers, film thickness 35-50um, flash dry for 5 minutes every time.

7: Drying time: self-drying at room temperature 25ºC for about 1 hour can be water mill, dry grinding for about 2 hours. Bake 60 ° C -70 ° C /10 minutes.

8: Grinding process: water sandpaper P600-P1000 or (mechanical) dry grinding P320-P400.

9: Points for attention:      
    (1) The paint should be thoroughly stirred before spraying, and supporting the use of hardener, diluent. according to the temperature, diluent is divided into  (standard dry, fast dry, slow dry).      
    (2) When spraying, the first layer not to be too wet and thick, and the volatile time between the layers should not be too short;      
    (3) must be completely dry in the case of grinding, otherwise it is easy to bite sandpaper or sand marks seriously cause color paint loss light and other maladies.



The best exporter & manufacturer of car paint in China. Up increasing annually for overseas market. Join Us!!!



Car Paint, Auto Paint, Automotive Paint,
Auto refinish, Car Refinish, Automotive refinish ---

Fast Double Pack Primer Surfacer
Multy-purpose double pack fast drying primer surfacer, with strong filling power, fine adhesion between coats and good sanding properties, can increase gloss and build of topcoat. The recommended application temperature is below 25 degree

Substrates	Dried and sanded existing finishes, all kinds of primer and putty.
Surface Cleaning	Remove wax, silicon and other contaminations with degreaser
Mixing Ratio	Temperature	Item	Weight	Volume
	below 25 degree	Fast Primer Surfacer	100 parts	3 parts
		Fast Drying Hardener	25 parts	1 parts
		Thinner	25-40 parts	1-1.5 parts
Pot Life	25 degree, 45 minutes
No. of Coats	2-3coats, 40-60um in total.
Flash-off Time	5-10 minutes, 25 degree
SSpray Gun & Pressure	Gravity Feed        1.4-1.6mm          3-5kg/cm 2 Siphon Feed        1.7-1.8mm          3-5kg/cm 2
Drying Time	25 degree, 2-3 hours
Sanding	P400-P600 dry or P800-1000 wet.
Re-coat	After drying and sanding, re-coat all kinds of topcoat.
Shelf life	2 years in original sealed can at cool and dry place at 20 degree
Packaging	Primer Surfacer: 4kg; Hardener: 1L