Color: | Light Yellow |
---|---|
Appearance: | Liquid |
Main Raw Material: | Acrylic & Polyurethane |
Paint Film Property: | Antiseptic Paint |
Method: | Spray |
Level: | Finish Coat |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Substrates | Sanded bare metal or epoxy primer | |||
Surface Cleaning | Remove wax, silicon, and other contaminations with degreaser. | |||
Mixing Ratio | Putty: Hardener=100: 1.5-3 (by weight) | |||
Temperature | Item | Minutes (25 degree) Pot life | Minutes (25 degree) Dry-to-Sand (wet) Time | |
Below 5degree | (Ultra Fast Drying) | 1-2 | 3-6 | |
5-15degree | (Extra Fast Drying) | 2-4 | 6-12 | |
15-25degree | (Fast Drying) | 4-6 | 10-18 | |
25-30degree | (Standard) | 7-9 | 14-27 | |
Above 30degree | (Slow Drying) | 10-13 | 20-36 | |
Method of Application | Spread with putty knife, spreader | |||
Sanding | Wet sanding: first sanding with P80-P240, second sanding with P320-P400. | |||
Not Suitable Substrates | Thermoplastic paint, plastic primer, etch primer and alloy | |||
Shelf Life | 6 months in original sealed can at cool and dry place at 20degree | |||
Packaging | 4kg |
Substrates | Dried and sanded existing finishes, putty, 1K & 2K primer. |
Surface Cleaning | Remove wax, silicon, or other contaminations with degreaser. |
Mixing Ratio | Ready to use. (if the filer solvent evaporates) |
Application Method | Directly spread thin coat by coat. Flash-off time of every coat is 10-15 minutes. |
Application Tool | Putty knife, soft rubber or plastic spreader. |
Dry to Sand | At 25 degree, 30 minutes, allow longer drying time for thick coating. |
Sanding | Wet sanding with P800-P1000; Dry sanding with P600-P800 |
Shelf Life | 2 years in original sealed can at cool and dry place at 20 degree |
Packaging | 1kg |
Substrates | Dried and sanded existing finishes, all kinds of primer and putty. | |||
Surface Cleaning | Remove wax, silicon and other contaminations with degreaser | |||
Mixing Ratio | Temperature | Item | Weight | Volume |
below 25 degree | Fast Primer Surfacer | 100 parts | 3 parts | |
Fast Drying Hardener | 25 parts | 1 parts | ||
Thinner | 25-40 parts | 1-1.5 parts | ||
Pot Life | 25 degree, 45 minutes | |||
No. of Coats | 2-3coats, 40-60um in total. | |||
Flash-off Time | 5-10 minutes, 25 degree | |||
SSpray Gun & Pressure | Gravity Feed 1.4-1.6mm 3-5kg/cm 2 Siphon Feed 1.7-1.8mm 3-5kg/cm 2 |
|||
Drying Time | 25 degree, 2-3 hours | |||
Sanding | P400-P600 dry or P800-1000 wet. | |||
Re-coat | After drying and sanding, re-coat all kinds of topcoat. | |||
Shelf life | 2 years in original sealed can at cool and dry place at 20 degree | |||
Packaging | Primer Surfacer: 4kg; Hardener: 1L |
Substrates | Dried and sanded existing finishes, steel, iron and glass fiber reinforced plastic | |||||
Surface Cleaning | Remove wax, silicon and other contaminations with degreaser | |||||
Mixing Ratio |
Temperature | Item | Weight | Volume | ||
Above 30degree | Fast Epoxy Primer | 100 parts | 3.5 parts | |||
Drying Hardener | 20 parts | 1 parts | ||||
Thinner | 20-30 parts | 1 parts | ||||
Under 30 degree | Fast Epoxy Primer | 100 parts | 3.5 parts | |||
Fast Drying Hardener | 20 parts | 1 parts | ||||
Thinner | 20-30 parts | 1 parts | ||||
Pot Life | At 25degree, Fast Drying Hardener: 3-4 hours; Drying Hardener: 4-6 hours | |||||
No. of Coats | 2 coats, about 30-50 um | |||||
Flash-off Time | At 25degree, 5-10 minutes between coats. | |||||
Spray Gun and Pressure | Gravity Feed 1.4-1.6mm 3-5kg/cm 2 Siphon Feed 1.7-1.8mm 3-5kg/cm 2 |
|||||
Drying Time | Item | 25degree | 70degree | |||
Fast Drying Hardener | 3-5 hours | 40-50 minutes | ||||
Drying Hardener | 6-8 hours | 50-60 minutes | ||||
Sanding | Dry sanding with P240-P400, or wet sanding with P600-P800 | |||||
Re-coat | After drying and sanding, re-coat with putty, primer surfacer and all kinds of topcoat. | |||||
Shelf Life | 2 years in original sealed can at cool and dry place at 20degree | |||||
Packaging | Epoxy primer in 5kg, Hardener in 1L, Thinner in 1L |
Suppliers with verified business licenses