Focus Epoxy Primer (Grey, White, Zinc Yellow) High Application Surface Protective Coating Acrylic Auto Paint Good Adhension Good Covering Car Paint

• Customization: Available
• Color: Grey,White, Zinc Yellow
• Appearance: Liquid
• Model NO.: Epoxy Primer
• Paint Film Property: Antiseptic Paint
• Method: Spray
• Level: Finish Coat
• Certification: ISO14001, ISO9001
• Substrate: Iron
• Components: Solvent
• Formation Mechanism: Conversion Type
• Use: Car Paint, Automotive Paint
• Coating: Auto Paint, Automotive Refinish
• Advantage: High Gloss, High Adhension
• Application: Good Coverage, High Concentration
• Practicability: High Chroma, Easy Operation
• Protection: Corrosion Resistant, Weather Resistance
• Aspect: Good Colors, Levelling Property
• Function: Fillibility, Repair
• High Performance: Flexibility,High Fullness,Good Transparency
• Operation: Easy Operation, Easy Sanding, Easy Spraying
• Characteristics: Highly Metallic, High Shining,High Flash
• Transport Package: Standard Export Carton
• Specification: Carton, Drum, OEM Could Be Serviced
• Trademark: All our brands
• Origin: Guangdong, China
• HS Code: 3208
• Production Capacity: 1000kg/H

Product Description

Epoxy primer
1: Product Features: This series of products are two-component pure epoxy primers with excellent adhesion, providing excellent adhesion, corrosion resistance and chemical resistance to all kinds of metals, FRP and glass

2: Usage: Usually used for all kinds of vehicles, machinery and other metal surface protective coating

3: Suitable substrate: iron, aluminum, galvanized sheet, glass fiber reinforced plastic, stainless steel and other surfaces that have been polished and completely clean.

4: Mixing ratio (volume ratio) : Epoxy primer 100%: hardener 25%: thinner 25%

5: Spraying viscosity and time: mix evenly before use, spraying viscosity is 20 seconds (coating -4 cups, 20ºC), the time limit is 2 hours /20ºC

6: Spraying requirements: Use 1.5 ~ 1.8mm caliber spray gun, air pressure is 3-5 bar, spray 2-3 monolayers, film thickness is about 40 ~ 50um, flash dry for 5 minutes every time.

7: Drying time, grinding: room temperature 20ºC for 3 hours, bake 70ºC-80ºC/20 minutes

8: Grinding process: water sandpaper P180-P800 or (mechanical) dry grinding P180-P240.

9: Points for attention:      
(1)Please stir well before use, and filter clean; .      
(2)In order to ensure the coating effect, please use epoxy special hardener, diluent; .      
(3) Primer should not be sprayed too thick, otherwise it will cause too slow drying or poor adhesion between layers. When the working environment temperature is lower than 5ºC, it is not suitable to spray 2K epoxy primer or heat baking.



Expoxy Primer
Good Quality Car Paint, Car refinish, Auto paint, auto refinish
Epoxy Primer Fast drying

Exellent rust-proofing and excellent adhension to steel, aluminium and galvanized steel.

Substrates	Dried and sanded existing finishes, steel, iron and glass fiber reinforced plastic
Surface Cleaning	Remove wax, silicon and other contaminations with degreaser
Mixing Ratio	Temperature	Item		Weight		Volume
	Above 30degree	Fast Epoxy Primer		100 parts		3.5 parts
		Drying Hardener		20 parts		1 parts
		Thinner		20-30 parts		1 parts
	Under 30 degree	Fast Epoxy Primer		100 parts		3.5 parts
		Fast Drying Hardener		20 parts		1 parts
		Thinner		20-30 parts		1 parts
Pot Life	At 25degree, Fast Drying Hardener: 3-4 hours;  Drying Hardener: 4-6 hours
No. of Coats	2 coats, about 30-50 um
Flash-off Time	At 25degree, 5-10 minutes between coats.
Spray Gun and Pressure	Gravity Feed      1.4-1.6mm          3-5kg/cm 2 Siphon Feed      1.7-1.8mm          3-5kg/cm 2
Drying Time	Item		25degree		70degree
	Fast Drying Hardener		3-5 hours		40-50 minutes
	Drying Hardener		6-8 hours		50-60 minutes
Sanding	Dry sanding with P240-P400, or wet sanding with P600-P800
Re-coat	After drying and sanding, re-coat with putty, primer surfacer and all kinds of topcoat.
Shelf Life	2 years in original sealed can at cool and dry place at 20degree
Packaging	Epoxy primer in 4L, Hardener in 1L, Thinner in 1L